STERLING Elegance Letter Box – MB03. Part of the Sterling Letterbox range this good quality Stainless Steel Letter Box provides a durable stylish finish.
The simple design includes an outward opening letter flap for weather protection and a good quality stainless steel finish. The weatherproof top flap opens to allow the letters to be posted and then access is gained through the key operated front flap.
In addition it can also be fitted to an exterior wall, or the back of a door or gate as there is a cut-out in the rear panel to allow the letters to be posted through.
Often specified to be fitted as a bank of letterboxes in multi occupancy buildings.
The security of the Letter Box is very good with 4 fixing points accessible only from inside the box and all fixings supplied.
Supplied in SINGLES complete with keys, fixings and screws. - Male - adult
Letterbox made of rust-resistant stainless steel with double-sided opening newspaper compartment, C4 opening across, open from the top down, quality and design Made in Germany - very weather-resistant - very easy to take care of - weight 4.6 kg The delivery includes all mounting materials, two safety keys for the cylinder lock and an engravable, self-adhesive name plate made of aluminium. No special design possible. - Aluminium
A nice quality solid brass reproduction Edwardian brass letterbox with clapper from the Art Nouveau/Edwardian era. The letterplate flap has an antique hammered effect with raised lettering. The letter plate is un lacquered so will tarnish in the traditional way, due to the nature of them being un lacquered there might be some very light surface marks. Sizes & info Finish: Polished brass Max plate size: 260mm x 125mm (10in x 5in) Projection: 25mm (1in) Distance between bolts: 185mm (7.25in) centre to centre Length of bolts: 55mm (2.25in) Opening size: 155mm x 45mm (6.25in x 1.75in) Weight: 750g Incl VAT
These Black replacement Upvc letterplates and letterboxes suit most Upvc doors and also fit Wooden doors and Aluminium doors and are easy to install
10" or 12" or 12" Slimline (please enquire about slimline)
Guidelines on how to replace your letterbox:
Measure the Width & Height of your letterbox this will establish whether it is a 10" letterbox, 12" letterbox or Slimline letterbox. Compare your letterbox sizes to the additional images (Above).
Remove the fixing screws from both sides of your old letterbox (found underneath the flap) and remove letterbox. The outside part of the letterbox may be a little tougher to remove due to silicone being applied when originally fitted, use a putty knife to cut away the silicone. Measure the apperture of the hole where the old letterbox came from and check the size with the additional images (above) and select the letterbox required.
The existing hole on your door where your letterbox fits may need some manipulation to fit the new letterbox this is due to there being many makes and models of letterbox and there may be a slight size difference in the aperture where the sleeve of the letterbox fits into the door.
If the sizes don't match with the additional images please call us on 01292 280111 and we will source your required letterbox.
The House Nameplate Company Black Letterbox (H)330mm (W)400mm.Suitable for post or wall mounting this black steel letterbox will give a touch of style to your home. It will stop cold air and draughts entering your home. It comes with fixings supplied for quicker installation.