Just Jump mat is a coaching tool for determining explosive power for the vertical jump test. It also provides accurate timing for straight-line sprint and multi-directional sprint tests. The mat also has a ‘4-Jump’ mode – this gives the athlete’s average ground time (reaction time), explosive leg power factor (air time/ground time) as well as jump height. We also supply a Plyometric version which offers TWO more modes: Jump 60 times and a Plyometric mode (Jump On/Off). The Plyometric version measures in imperial units. The Just Jump mat can determine: Vertical jump height Hangtime Explosive leg power Reaction time Leg power index The system has three modes. The ‘Jump 1 Time’ mode also works as a timing system for the measurement of sprints and agility sequences. The modes are as follows: Jump 1 Time – Perform a vertical jump and upon landing the “Air Time & Jump Height” is shown on the handheld device. Jump 1 Time – (secondary use) The display monitor has a default value of 1.1 secs in this Jump mode. After which it changes to ‘Timer Mode’. You can use this for shuttle drills, with the mat acting as a start and finish point. As the athlete leaves the mat, the timer starts (after 1.1 secs) and stops when the athlete returns to the mat. You can repeat this as soon as the athlete leaves the mat again, as in a repetitive shuttle. The tester will record each successive time value until the test finishes. Sprint Timer – Programme the distance (up to 999 metres) and place the mat at the finish point. The timer starts using the microphone on the device and reacts to a whistle or shouted command. The timer ceases as the athlete ‘crosses the line’ and steps on the mat. The display records the time of the run to the nearest hundredth of a second. Jump 4 Times – This consists of four vertical jumps performed at greatest height and speed. The handheld device then calculates: Average ground time Average jump height Explosive leg power factor (ELPF – this is the Air Time divided by the Ground Time) This version of the Just Jump System is a metric version. Key Features: Portable and easy to use – requires no external power supply same as the Takei jump mat Easy to operate – requires no specialist skills to work Jump 1 Time Mode – measures jump time and calculate ‘hang-time’. You can also use this as a timing device for multi-directional tests Sprint Timer – measures a range of distances, up to 999 metres Jump 4 Times Mode – this measures ground contact time, jump height and explosive leg power Box Includes: Just Jump handheld meter Large Mat Instruction Sheet Technical Specification: Operating temperature: 0-65 degrees (32-150F) Accuracy: – 1/2 of reading from 5-59 Relative Humidity: 95% RH or less at 30 degrees (85F) non-condensing Storage Temperature: -25 to 70 degrees (-13 to 158F) Battery Life: (Alkaline): 80 hours typical at 30 degrees (73F) Power: 9V Battery (NEDA1604A, 6F22, 006P) Dimensions: 79cm x 76cm x 3cm) Manufactured in the US by Probotics For questions about the Just Jump Mat, call the team on 01244 343106.